Long time no talk about this issue, and in the test machine to the customer in the process encountered situations like. So it is necessary to remind everyone must pay attention to this detail. Before each use the right amount of water will turn heads at the moist, it is a good equipment operation, also played a role in the dust. After each shutdown to check whether the material inside the silo squeeze clean. In order to avoid the accumulation of material inside the silo. Consequences of hoarding material is again cause the device to boot crash, fixed broken nose screws, motor reversal, or a mold damage. Since the shutdown of the material stays in the silo where the air temperature will be part of the water evaporate out, the device itself will be part of the water temperature of the evaporator out, it will be dry. Dried in a bunker in the slime viscosity, hardness. Particularly troublesome time-consuming clean-up. Similarly, staying in the nose mold material will solidify. To continue smoothly so the next use, you have to use a needle to punch holes in the mold material together to clean up. So to remind the majority of users, it is necessary to clean up the silo, the nose, the rules and regulations set into a workshop. Remind workers to operate the equipment according to the articles of association, so that we can extend the life of equipment. Ensure the accuracy of the use and production.